90341-12012 Engine Oil Drain Plug for Toyota Camry 4Runner C-HR Avalon Corolla

◆ This oil drain plug is a direct replacement for the original Toyota unit, designed to seal the engine oil pan and allow clean drainage during oil changes.

◆ The OEM reference number is 90341-12012. The superseded part number is 9034112026, which identifies the same plug assembly .

◆ The plug is engineered to OEM standard dimensions with an M12x1.25 thread and a 14 mm external hex head .

◆ It is designed for a wide range of Toyota, Scion, and Lexus models including the Camry, 4Runner, C-HR, Avalon, Corolla, Prius, RAV4, Tacoma, Tundra, and Land Cruiser, covering model years from approximately 2005 through 2025 .

◆ This product is an engine oil drain plug manufactured to meet original quality standards for thread fit, sealing, and durability.

◆ Part Number: 90341-12012

◆ Superseded Reference: 9034112026

◆ Component Type: Engine Oil Drain Plug / Oil Pan Drain Plug

◆ Vehicle Make: Toyota / Scion / Lexus

◆ Thread Size: M12 x 1.25

◆ Hex Head Size: 14 mm

◆ Placement: Lower oil pan

◆ Note: Gasket/washer is a separate part and is not reusable; it must be replaced during installation

◆ OEM Standard Fit: Manufactured to exact original specifications for a direct, hassle-free replacement.

◆ Secure Sealing: Precision threads and head design ensure a tight seal against the oil pan to prevent leaks.

◆ Durable Construction: Built with materials resistant to heat, oil, and corrosion.

◆ Cost-Effective Maintenance: An inexpensive solution for routine oil changes without compromising on fit or function.

◆ Toyota Camry: 2018–2025 (2.5L L4)

◆ Toyota 4Runner: 2017–2025 (4.0L V6, 2.4L L4)

◆ Toyota C-HR: 2018–2022 (2.0L L4)

◆ Toyota Avalon: 2016–2018 (2.5L L4 Hybrid)

◆ Toyota Corolla / Corolla iM: 2016–2017

◆ Toyota Land Cruiser: 2016–2017 (5.7L V8)

◆ Toyota Highlander: 2016–2017

◆ Toyota Prius / Prius C / Prius V / Prius Prime: 2016–2017

◆ Toyota RAV4: 2016–2017

◆ Toyota Tacoma: 2016–2017

◆ Toyota Tundra / Sequoia: 2016–2017

◆ Scion tC: 2005–2016

◆ Scion iM: 2016

◆ Note: Verify against your vehicle's original part number and engine variant before ordering, as fitment may vary by market and production period.

Q1: Is this a genuine Toyota part?

A: This listing refers to a replacement part manufactured to meet or exceed OEM standards. The 90341-12012 reference is the original equipment part number. Both genuine Toyota and aftermarket equivalents are available that match the original fit and function.

Q2: How do I confirm if it fits my vehicle?

A: Check your vehicle’s existing drain plug. If it is stamped with 90341-12012 or 9034112026, this replacement will fit. Also confirm your vehicle model and engine variant against the compatibility list above. The plug uses an M12x1.25 thread and a 14 mm hex head .

Q3: Does this include the gasket/washer?

A: The gasket is typically a separate part number (commonly 90430-12031) and is not included unless explicitly stated in the listing. The original gasket is not reusable and must be replaced during installation to ensure a proper seal .