39680-TK8-A11 Rear Outer Parking Sensor for Honda Odyssey Pilot 2011-2017

◆ This parking aid sensor is a direct replacement for the original Honda unit, designed to detect obstacles behind the vehicle during reversing and low-speed maneuvering.

◆ The base OEM reference number is 39680-TK8-A11. Honda uses color-specific suffixes for this sensor (e.g., -ZA, -ZE, -ZG), with each suffix corresponding to a particular paint code. The base number alone identifies the sensor type, while the suffix must match your vehicle’s original color .

◆ The sensor is an ultrasonic unit with a 6-pin connector and a paintable surface, engineered to OEM standard dimensions for direct fitment into the rear bumper opening .

◆ It is primarily designed for the Honda Odyssey (2011–2017) and Pilot (2012–2015), covering rear outer positions .

◆ This product is a parking aid sensor manufactured to meet original quality standards for detection accuracy, fit, and durability.

◆ Part Number: 39680-TK8-A11 (base number; color suffix varies)

◆ Component Type: Ultrasonic Parking Aid Sensor / Reverse Sensor

◆ Vehicle Make: Honda

◆ Primary Models: Odyssey, Pilot

◆ Connector: 6-pin

◆ Mounting Type: Plugged

◆ Color: Varies by suffix (paintable)

◆ Note: Confirm the color suffix matches your vehicle’s original sensor before ordering

◆ OEM Standard Fit: Manufactured to exact original specifications for a direct, hassle-free replacement.

◆ Accurate Obstacle Detection: Ultrasonic sensing provides reliable distance measurement for the rear parking assist system.

◆ Paintable Surface: The sensor face can be painted to match the vehicle’s body color, though the factory finish thickness should be maintained to preserve detection performance .

◆ Durable Construction: Built with materials resistant to road debris, moisture, and temperature changes.

◆ Honda Odyssey: 2011–2017 (rear outer position)

◆ Honda Pilot: 2012–2015 (rear position)

◆ Additional cross-reference data lists the Accord VIII (CU) for certain applications

◆ Note: Fitment and required quantity vary by position (outer/inner) and trim level. The color suffix must match your vehicle’s original sensor. Verify against your VIN or existing part number before ordering.

Q1: Is this a genuine Honda part?

A: The 39680-TK8-A11 reference is the original equipment part number. Genuine Honda sensors are supplied with a specific color suffix (e.g., -ZA, -ZE, -ZG). Aftermarket equivalents are also available that match the original fit and function .

Q2: How do I confirm if it fits my vehicle?

A: Check your vehicle’s existing sensor for the full part number, including the color suffix. The base number 39680-TK8-A11 confirms the sensor type, while the suffix must match your vehicle’s paint code. Also confirm your vehicle is an Odyssey (2011–2017) or Pilot (2012–2015) and that the position is the rear outer bumper .

Q3: Does the color suffix matter?

A: Yes. Honda uses suffix codes to denote pre-painted sensor colors. If you order a suffix that does not match your vehicle’s paint code, the sensor will not match the bumper finish. Alternatively, a paintable version can be refinished by a body shop, but the paint thickness should not exceed factory specifications .