8694809 Rear Crankshaft Oil Seal for S60 S80 V60 XC60 2.0T

◆ This rear crankshaft oil seal is a direct replacement for the original unit, designed to seal the rear end of the crankshaft where it exits the engine block, preventing engine oil from leaking into the transmission bell housing area.

◆ The OEM reference number is 8694809. Interchangeable or related references include 30711874 and 32317382.

◆ The seal is commonly supplied as an assembly with an aluminum flange. Typical dimensions are approximately 120 mm x 115 mm x 35 mm, with an NBR rubber or PTFE sealing lip.

◆ It is primarily designed for the European marque’s models equipped with 2.0T engines, including the S40, S60, S80, V50, V60, V70, XC60, and C30, covering model years from approximately 2004 through 2016.

◆ This product is a crankshaft rear main seal manufactured to meet original quality standards for sealing performance, fit, and durability.

◆ Part Number: 8694809

◆ Related References: 30711874, 32317382

◆ Component Type: Rear Crankshaft Oil Seal / Rear Main Seal with Flange

◆ Vehicle Make: The vehicle manufacturer (European marque)

◆ Engine Compatibility: 2.0T (and related variants)

◆ Dimensions: Approx. 120 mm x 115 mm x 35 mm

◆ Material: NBR rubber / PTFE sealing lip with aluminum flange

◆ Placement: Rear of engine block, transmission side

◆ Note: Flywheel or flexplate bolts are typically torque-to-yield and may require replacement during installation

◆ OEM Standard Fit: Manufactured to exact original specifications for a direct, hassle-free replacement.

◆ Effective Oil Sealing: Prevents engine oil leakage at the crankshaft exit point, protecting the clutch or torque converter area.

◆ Integrated Flange Design: Supplied with aluminum flange for simplified installation and proper alignment.

◆ Durable Construction: Built with materials resistant to heat, oil exposure, and crankshaft rotation.

◆ S40 (2.0T): 2004–2012

◆ S60 (2.0T): 2011–2016

◆ S80 (2.0T): 2011–2016

◆ V50 (2.0T): 2004–2012

◆ V60 (2.0T): 2011–2016

◆ V70 (2.0T): 2008–2016

◆ XC60 (2.0T): 2010–2016

◆ C30 (2.0T): 2007–2013

◆ Note: Fitment varies by engine code and market. Verify against your vehicle‘s original part number and engine configuration before ordering.

Q1: Is this a genuine OEM part?

A: The 8694809 reference is the original equipment part number. Both genuine OEM and aftermarket equivalents are available that match the original fit and function.

Q2: How do I confirm if it fits my vehicle?

A: Check your vehicle’s existing oil seal or reference the OEM number 8694809. Confirm your vehicle is equipped with a 2.0T engine and matches one of the models listed above. Some cross-reference data also lists 30711874 and 32317382 as related or superseded numbers.

Q3: Does this include the flywheel bolts?

A: No. The rear main seal assembly is typically supplied on its own. Flywheel or flexplate bolts are separate components and are often torque-to-yield, meaning they should be replaced during installation. Verify the required hardware before starting the job.