DYC000190 Headlamp Washer Jet Clip for Discovery 3 4 Freelander 2 Range Rover Sport

◆ This retaining clip is a direct replacement for the original Land Rover unit, designed to secure the headlamp washer jet nozzle firmly into the front bumper aperture.

◆ The OEM reference number is DYC000190. The superseded part number is LR003145, which identifies the same clip assembly.

◆ The clip is a small, spring-loaded retainer that holds the pop-up washer jet in place on the front bumper, just below the headlamp.

◆ It is designed for a wide range of Land Rover models including the Discovery 2, Discovery 3, Discovery 4, Freelander 2, Range Rover L322, and Range Rover Sport L320, covering various production years from approximately 1998 through 2016.

◆ This product is a headlamp washer retaining clip manufactured to meet original quality standards for fit, retention, and durability.

◆ Part Number: DYC000190

◆ Superseded Reference: LR003145

◆ Component Type: Headlamp Washer Jet Retaining Clip

◆ Vehicle Make: Land Rover

◆ Placement: Front Bumper (Left or Right side washer jet)

◆ Material: Steel (typical aftermarket specification)

◆ Color: Black / Natural metal

◆ Quantity: Sold individually; one clip is required per washer jet

◆ OEM Standard Fit: Molded to exact original specifications for a direct, hassle-free replacement.

◆ Secure Retention: Holds the headlamp washer jet firmly in the bumper aperture, preventing the nozzle from loosening or falling out.

◆ Simple Installation: Pushes into place by hand to lock the nozzle; no special tools required.

◆ Cost-Effective Maintenance: An inexpensive solution to restore proper washer jet function when the original clip is damaged or lost during removal.

◆ Land Rover Discovery 2 (L318): 1998–2004 (washer jet to bumper, break at VIN 3A000000)

◆ Land Rover Discovery 3 (L319): 2005–2009 (up to VIN 9A999999)

◆ Land Rover Discovery 4 (L319): 2010–2016 (from VIN AA000001)

◆ Land Rover Freelander 2 (L359): 2006–2014

◆ Land Rover Range Rover (L322): 2002–2012 (2002–2009 up to VIN 9A999999; 2010–2012 from VIN AA000001)

◆ Land Rover Range Rover Sport (L320): 2005–2013 (2005–2009 up to VIN 9A999999; 2010–2013 from VIN AA000001)

◆ Note: Verify your vehicle's VIN against the applicable break points before ordering, as fitment varies by chassis range.

Q1: Is this a genuine Land Rover part?

A: This listing refers to a replacement part manufactured to meet or exceed OEM standards. The DYC000190 reference is the original equipment part number, and LR003145 is the superseded reference. Both genuine OEM and aftermarket equivalents are available that match the original fit and function.

Q2: How do I confirm if it fits my vehicle?

A: Check your vehicle's headlamp washer configuration. This clip is used across Discovery 2/3/4, Freelander 2, Range Rover L322, and Range Rover Sport L320. Pay attention to VIN break points: Discovery 3 and pre-2010 L322/L320 use the clip up to VIN 9A999999, while Discovery 4 and 2010+ L322/L320 use it from VIN AA000001.

Q3: How many clips do I need?

A: Typically one clip is required per headlamp washer jet. Vehicles with washer jets on both sides require two clips. It is recommended to order a spare, as the small retaining tabs can be easily damaged during removal.